3d Printer Enclosure WF
This enclosure advances the ability to maintain the optimal environment for 3D printing high-temperature filaments. Included in your purchase are 25 STL files and a set of assembly instructions to build the enclosure illustrated in the renders. There are a number of parts required to complete the build. A list of these parts can be found either in the assembly instructions or below under the section Required Hardware. The included assembly instructions are used to build an enclosure with interior dimensions of 640mm x 640mm x 620mm. If this does not meet your needs, these dimensions can be scaled without needing to change the 3d printed parts. This will allow you to create virtually any size enclosure.
- Uses high tolerance 1"x1" wood dowels :
- 640mm x 640mm x 620mm build volume.
-Maintains a 65F - 70F Environment. (Tested using PETG)
- Door latch with embedded magnets.
- External PSU mount for i3 MK3 printers.
- External spool adapter.
Used Filament ( m )
Used Filament ( g )
4d 8h 18m
25 STL Files
1 PDF Assembly Instructions
1 PDF Printing Guide